Tiny Mixer. Huge Functionality.
The 08 is designed to be the best-in-category mixer for small market broadcasters - whether they operate out of studios or bedrooms.
Small in size and price, big in usefulness, this console is ideal for LPFMs, podcasts, web streaming or remote applications requiring a simple low profile eight-channel board. Made for the demands of professional broadcasting, the Audioarts 08 is designed for fast-paced, live on-air, streamed or produced applications with easy access to controls.
In one compact frame, the Audioarts 08 covers all the basics with a single stereo mixing bus (balanced or unbalanced output); two mic inputs (one for guest, and one for host); USB input to play in audio from a PC; USB output to record directly to PC recording software; mix-minus telephone output for interfacing to a telephone hybrid; monitor, headphone and cue for off-air monitoring; speaker mute for muting monitor speakers when the mic is on (eliminating the possibility of feedback); and unbalanced or balanced inputs/outputs for interface with consumer or professional grade equipment.
Features
- 8-channel frame
- Stereo mixing bus, balanced or unbalanced
- Compact, tabletop mount
- Long-throw faders on inputs and monitors
- Dual, super-quiet, high-performance microphone preamps
- LED illumination on all switches
- Headphone jack with built-in amplifier (with +20dB output)
- USB - bidirectional audio port for convenient interfacing to computers and automation systems
Input section
CUE Button (Channels 2-8) Places the channel’s signal on the console’s cue bus, where it may be heard in the external cue speaker, as an interrupt to the console operator’s headphones, and as an interrupt to the monitor speakers, if so programmed.
TB Button (Channel 1/Mic only) When the TB switch is pressed (it is momentary action), the microphone will interrupt the regular caller signal, thus allowing the DJ to talk to the caller prior to airing.
FADER Sets the channel’s level.
MIC 1/MIC 2 Buttons Turns the mic channels on and off by means of electronic switching and can simultaneously start external source machines. The mic channels can also be programmed to activate monitor mute and on air tally.
Stereo Button Turns the channel on and off by means of electronic switching and can simultaneously start external source machines.
Simple Phone (Channel 7 only) Used for telephone call-in segments and controls the audio for the caller. The signal enters the console from your station hybrid.
USB (Channel 8 only) Selects signal from USB port and brings it into console as a stereo analog signal.
Control Room Section
EXT Switch Pressing the EXT switch allows the operator to pick up the external input (useful for such items as tape recorders or air returns) to listen.
CUE Level Control Determines the overall loudness of the cue signal as it appears in the console’s cue speaker.
CONTROL ROOM Level Control Determines the overall loudness of the signal being monitored as it appears in the Control Room speakers.
HEADPHONE Level Control Determines the overall loudness of the headphone output signal.
Specifications
AUDIO INPUT
Mic
XLR connector, balanced
Electronic differential >2KΩ bridging
Adjustable sensitivity -64dB to -24dB
Maximum input 0dBu
Line (Caller, External)
RJ-45 balanced connectors
RCA unbalanced connectors
Electronic differential >40KΩ bridging
Maximum input +28dBu
AUDIO OUTPUT
Program
RJ-45 connectors, balanced
Electronic differential, 100Ω source
Impedance to drive >600Ω
0VU = +4dBu, max. output +24dBu
Monitor
Separate left and right RCA connectors, unbalanced
Headphone
Stereo 1/4” TRS connector to directly drive typical broadcast style headphones >200Ω
Cue
1/4” RCA connector, unbalanced
PERFORMANCE
Frequency response
Mic ±0.10dB 20Hz-20kHz
Line ±0.1dB 20Hz-20kHz
Dynamic Range -115dB dynamic range
Headroom
24dB above -4dB
Noise
Mic -128dB EIN
Line -88dB ref +4dBu
THD+N
Mic <0.001% @1kHz/+24dBu
Line <0.001% @1kHz/+24dBu
Bus Crosstalk -111dB @1kHz
Stereo Separation -66dB @1kHz
Off Isolation -127dB @1kHz
LOGIC
On-air
RJ-45 connector
Low-current relay contact closure to drive external relay to switch AC to on-air light
PHYSICAL
Dimensions
16.62”/41.21cm wide
10.5”/26.67cm deep
1”/2.54cm high @front
2.37”/6.02cm high @rear
Weight 6lbs/2.72kg
Shipping weight 9lbs/4.08kg
Power 100-240VAC, 50-60Hz, 25W
ROHS Compliant
Genuine Wheatstone Add-Ons
Whether you are setting up interview suites or desks, or just making workflow more intuitive and efficient, Wheatstone has the gear you need to get the job done.
